最新资讯 New
搜索 Search
你的位置:首页 > 新闻动态 > English new

Aluminium and aluminium alloy slag agent

2016-11-13 22:56:47点击:

Aluminium and aluminium alloy slag agent

Product description:

Aluminium and aluminium alloy melt in the end, especially after refining, the liquid aluminum surface has a very thin layer of scum, the more aluminum slag, slag is to change the effect of slag and liquid aluminum wettability, and aluminum, the surface tension of the interface to aluminium wetting slag, in under the condition of stirring, make effective separation, liquid aluminum and slag and slag become dry slag powder, effectively reduce the aluminum content in the residue, reduce the quantity of liquid aluminum, grilled slag with, decrease the loss of aluminum and increase economic benefits.

Product application:

Suitable for aluminum alloy aluminum slag separation inside the furnace

Product advantage:

Appropriate melting point, good liquidity, less dosage, obvious effect, etc

Product specifications:

Product features:

Slag agent all the materials are the proper heat treatment, removal of water with water and water of crystallization, and after a screening process ensure uniform particle size. Other materials according to the best ratio of formula to ensure after melting slag agent in liquid aluminum surface penetration performance is good, reaction to the full.

Directions for use:

Inside the furnace, use:

Aluminum melting heat up to 680 ° C to 740 ° C, the dozen slag agent with shovel evenly in the aluminum liquid level, and then the flux with grilled mixed with slag mix 3. 5 minutes, gently () along the furnace wall and crushed slag, grilled slag.

2, use outside the furnace:

The dozen agent evenly in aluminum slag had just pulled out, and then "Fried" slag, slag, liquid aluminum separation, grilled slag.

Four, the process parameters:

1, the flux usage: 0.2% ~ 0.2% (of liquid aluminum), namely 2 ~ 5 kg/tons of aluminum.

2, the use of temperature: 680 ° C to 740 ° C

Package: 20 kg/bag/box

Shelf life: 6 months