最新资讯 New
搜索 Search
你的位置:首页 > 新闻动态 > English new

Gravity casting coating

2016-10-19 22:50:52点击:

Gravity casting coating


Product name: non-ferrous metal mold casting TL7281 insulating coatings

Product details: white

Product performance: thermal insulation coatings, including lubrication and insulation components, the general type of coating. Especially suitable for gravity casting, mold of the section, is often used in small or medium such as piston parts, wheel hub, connecting rod, etc., can also be applied to complex castings, such as cylinder

Directions for use:

Mould preparation: clean mould, spray noisy after removing the dung, and coarsening surface. Mold evenly heated to 250 ℃ ~ 350 ℃. (if the mould has just left from production line, cooling, cleaning, should be heated again), and then cooled to 150 ℃ ~ 200 ℃.

Paint mixing: open the lid, will paint again heavy, mixing time, pour out the quantity dilution (1:3 according to the proportion of mixed with water) for a while until the even. The most appropriate dilution ratio depends on multiple factors (casting weight, pouring temperature, alloy type, spraying equipment, mold type, etc.)


Spraying: holding a gun, and the mold to keep certain spacing (reference distance is 300 mm), evenly spraying layers of back and forth, until they get the required coating thickness, general coating thickness from 75 to 125 microns.


Packing and storage: 5 kg/barrel, 20 kg/box, 16 kg/box. Store in dry place, not less than 10 ℃ ambient temperature.

Shelf life: 12 months